Conexpro

Úvodní stranaPowerPower cables and reductionConexpro DC power connector plug 2.1x5.5 mm with spring clamp

Conexpro DC power connector plug 2.1x5.5 mm with spring clamp

DC power male connector with dimensions 2.1 x 5.5 mm is used to power devices such as LEDs tapes, adapters, voltage converters, etc., which are equipped with the same DC socket. Thanks to the terminal board, the need for soldering is eliminated and the device can be easily connected. The wire connects to the connector using a spring terminal block ... More information

ManufacturerConexpro

PNPSC-21-55

EAN0710497562775

Where to buy Ask a question

Product description Technical parameters

Product description

DC power male connector with dimensions 2.1 x 5.5 mm is used to power devices such as LEDs tapes, adapters, voltage converters, etc., which are equipped with the same DC socket. Thanks to the terminal board, the need for soldering is eliminated and the device can be easily connected. The wire connects to the connector using a spring terminal block and no screwdriver is needed.

Do you have a question or comment about this product?

Ask a question

Technical parameters

Power

Maximum current [A]5

Maximum voltage [V]50

Physical characteristics

Output connector [mm]5.5 / 2.1

Contact form

Your name

Your company name

E-mail

Your message

Send

Another products from category (Power cables and reduction)

WN217-3/07/0.3BK-4

Conexpro cable reduction from UPS (IEC C14) to 4x 230V FR socket, cable 30 cm

New product

The network cable reducer is used for connecting 4 standard plugs (230 V AC) to the IEC C13 socket, used on the outputs of the UPS device. Thanks to high quality processing , reliability, simplicity and

UKCEE7

Conexpro plug adapter EU CEE7 to UK/IRL - CP1

Cable reducer converting a Euro 2-pin (CEE7) plug without earthing to a British 3-pin plug. The plug is equipped with a hinged cap and safety screw with external access. This conversion is not permanent as

DC-1F8M

Conexpro DC power splitter, 8x male, 1x female

DC cable splitter with 8 outputs . The input and output connectors have dimensions of 2.1/5.5 mm. The total length of the cable is 40 cm and it can handle a maximum load of 5 A at the input and 3 A at each

DC-1M

Conexpro DC power connector with cable, male, 25cm

The DC power cable is 25 cm long , one end is fitted with a 2.1/5.5 mm DC connector (male) and the other end has shaved ends without a connector . Such a cable is often used to power various electronic

DC-1F2M

Conexpro DC power splitter, 2x male, 1x female

DC cable splitter with 2 outputs . The input and output connectors have dimensions of 2.1/5.5 mm. The total length of the cable is 40 cm and it can handle a maximum load of 5 A at the input and 3 A at each

DC-1F1M

Conexpro DC extension cable with connectors, 1m

The power extension DC cable with a length of 1 meter has a 2.1/5.5 mm DC connector (male and female) on both ends. The cable is made of quality materials with a cross-section of 22 AWG (2 x 0.33 mm2), which

PTB-21-55

Conexpro DC power connector plug 2.1x5.5 with terminal block

DC-1F

Conexpro DC power connector with cable, female, 25cm

The DC power cable is 25 cm long , one end is fitted with a 2.1/5.5 mm DC connector (female) and the other end has shaved ends without a connector . Such a cable is often used to power various electronic

STB-21-55

Conexpro DC power connector socket 2.1x5.5 mm with terminal block

Recommended

DC power supply female connector (socket) with dimensions 2.1 x 5.5 mm serves to power the device, such as LED strips, adapters, voltage converters, etc., which are equipped with the same DC plug. Thanks to