Conexpro outdoor STP connector, IP68, CAT6A, RJ45

Conexpro outdoor STP connector, IP68, CAT6A, RJ45
Conexpro outdoor STP connector, IP68, CAT6A, RJ45Conexpro outdoor STP connector, IP68, CAT6A, RJ45Conexpro outdoor STP connector, IP68, CAT6A, RJ45Conexpro outdoor STP connector, IP68, CAT6A, RJ45
The outdoor coupler with STP type shielding is designed for connecting two network cables of the UTP/STP/FTP type, belonging to the categories CAT5E, 6, 6A and with a diameter from 4.5 to 7.5 mm. This coupling is IP68 certified and very easy to install. When tightening the connector caps on both sides of the coupler, it is important to ensure that ... More information
ManufacturerConexpro
PNCP-6A-STP-OUT
Where to buyAsk a question

Product description

The outdoor coupler with STP type shielding is designed for connecting two network cables of the UTP/STP/FTP type, belonging to the categories CAT5E, 6, 6A and with a diameter from 4.5 to 7.5 mm. This coupling is IP68 certified and very easy to install. When tightening the connector caps on both sides of the coupler, it is important to ensure that there are no gaps between the cable, the rubber seal and the coupler itself, which could cause a leak.

This connector features 3 micron gold-plated contacts that guarantee the highest signal throughput. It is also suitable for all PoE (IEEE 802.3af/at/bt) applications.

Do you have a question or comment about this product?
Ask a question

Download

Technical parameters

Physical characteristics

Type of couplerClassical RJ45
ShieldingYes
Protection classIP68
PurposeOutdoor
Outer diameter [mm)4,5 up to 7,5
Operating temperature [°C]-20 up to 70
Width [mm]28
Height [mm]28
Depth [mm]122
ColorBlack

General

CategoryCAT6A

Another products from category (Cable couplings)

Conexpro coupler toolless FTP, CAT6A, terminal block
CP-6A-STP-LT

Conexpro coupler toolless FTP, CAT6A, terminal block

Conexpro's robust self-tapping tool-less connector shielded RJ45 is designed for use with FTP class CAT6A cable with wires of the wire or copper type and a convenient installation that does not require the
Conexpro coupler UTP, CAT5E, RJ45
CP-5E-UTP-S

Conexpro coupler UTP, CAT5E, RJ45

The unshielded UTP straight coupler in white is designed for connecting two network cables of CAT5E category. This coupler features 2 RJ45 ports, allowing two network cables to be joined with a 1:1 connection
Conexpro keystone coupler UTP, CAT6, RJ45, white
CP-6-UTP

Conexpro keystone coupler UTP, CAT6, RJ45, white

UTP unshielded connector in white design is used to connect two network cables category CAT6 and lower. This connector has 2 RJ45 ports, allowing you to connect two network cables in case the length of the
Conexpro keystone coupler UTP, CAT6A, RJ45, black
CP-6A-UTP

Conexpro keystone coupler UTP, CAT6A, RJ45, black

The black UTP connector is used to connect two network cables category CAT6A and lower. This connector has 2 RJ45 ports, allowing you to connect two network cables in case the length of the original cable is
Conexpro coupler coupling FTP, CAT6A, terminal block
CP-6A-FTP-BOX

Conexpro coupler coupling FTP, CAT6A, terminal block

The shielded cut-in connector is used for the fixed connection of two class CAT6A cables using a krone-type cut-in field in case of cable repair or extension. The clutch includes a clear numerical scheme
Conexpro keystone coupler STP, CAT6, RJ45, silver
CP-6-FTP

Conexpro keystone coupler STP, CAT6, RJ45, silver

The STP shielded connector in silver design is used to connect two network cables category CAT6 and lower. This connector has 2 RJ45 ports, allowing you to connect two network cables in case the length of the
Conexpro keystone coupler STP, CAT6A, RJ45, silver
CP-6A-FTP

Conexpro keystone coupler STP, CAT6A, RJ45, silver

STP shielded coupler in silver design is used to connect two network cables category CAT6A and lower. This connector has 2 RJ45 ports, allowing you to connect two network cables in case the length of the